Checking Version; Equipment Required - Sony BKMA-U70 Installation Manual

Section 2

Checking Version

Before upgrading the system using the BKMA-U70, check that the versions of the respective option
boards that are installed in the MAV-70 are all version 2.50 or higher.
n
When capacity of a HDD is 36 GB, check the version number following the description shown in the
Installation Manual of the BKMA-U70XGI. When capacity of a HDD is 73 GB or larger and when only
upgrade of the HDD is to be executed, follow the steps shown in this section.

2-1. Equipment Required

(TeraTermPro is contained in the CD-ROM that is supplied with the HDD having capacity of 73 GB or
larger.)
. Personal computer (Windows95/98/2000/NT4.0)
. RS-232C cross cable
. TeraTermPro (Version 2.3)
2-2. Checking Version
1. Remove the ornamental panel (A) from the MAV-70XGI.
(Refer to Section 2-2-1 of the Maintenance Manual.)
2. Set the switch S3 on the front panel of the MAV-70XGI to INT.
Switch S3
3. Connect the MAV-70XGI to a personal computer with the RS-232C cross cable.
Personal computer
RS-232C cable (9P-9P)
COM1
2-1 (E)
BKMA-U70