Sony PMW-RX50 Operating Instructions Manual page 62

OTHERS
Menu items Subitems and setting values Contents
Password
Set
MAC Address
Net Config Reset
Wi-Fi Scan Networks
Setting for Wi-Fi
connection
Note
IFU-WLM3 is
required.
This menu is not
SSID (Network connection name
available when
display)
using the
CBK-WA100.
Network Type
Ch
Authentication
When [Network Type] is [Infra]
When [Network Type] is [Adhoc]
Encryption
When [Authentication] is [Open]
or [Shared]
When [Authentication] is [WPA]
or [WPA2]
WEP Key Index
Input Select
When [Encryption] is [WEP]
When [Encryption] is [TKIP] or
[AES]
Key (network key)
Set
62 Setup Menu List
(pmw-rx50)
Execute / Cancel
Execute / Cancel
Execute / Cancel
Reset
Infra / Adhoc
1 to 11
Open / Shared / WPA / WPA2
Open / Shared
Disable / WEP
Disable / TKIP / AES
1 / 2 / 3 / 4
ASCII5 / ASCII13 / HEX10 /
HEX26
ASCII8-63 / HEX64
Execute / Cancel
Sets a password in 0 to 31 alphanumeric characters.
Note
Each password character is displayed as " * " (asterisk).
Confirms the [Network] settings.
Select [Execute] to confirm.
Display the MAC address.
Reset the [Network] settings to the preset values.
Select [Execute] to reset.
Scan the available network connections when [Wi-Fi] is set to
[Enable].
Note
"Unknown" is displayed as the scan result when using the
IFU-WLM3. In this case, set [Network Type] to [Infra] or
[Adhoc].
Reset the network connection name to the default settings.
Select the connection mode.
[Infra]: Infrastructure mode
[Adhoc]: Ad hoc mode
Set the wireless channel when [Network Type] is [Adhoc].
Select the network authentication.
[Open]: Open system authentication
[Shared]: Shared key authentication
[WPA]: WPA (Wi-Fi Protected Access) authentication
[WPA2]: WPA2 (Wi-Fi Protected Access 2) authentication
Select the type of data encryption.
[Disable]: Do not apply data encryption.
[WEP]: WEP (Wired Equivalent Privacy)
[TKIP]: TKIP (Temporal Key Integrity Protocol)
[AES]: AES (Advanced Encryption Standard)
Select the key index when [Encryption] is [WEP].
Select the input format depending on the network key (or
security key).
[ASCII5]: Five characters ASCII format
[ASCII13]: 13 characters ASCII format
[HEX10]: 10 hexadecimal digits
[HEX26]: 26 hexadecimal digits
[ASCII8-63]: 8 to 63 characters ASCII 8-bit format
[HEX64]: 64 hexadecimal digits (characters)
Set the network key (or security key).
Confirm the [Wi-Fi] settings when [Wi-Fi] is set to [Enable].
Select [Execute] to confirm.