Button/Remote Status Screen; Battery/Media Status Screen - Sony PMW-RX50 Operating Instructions Manual

[3G SDI Out Level]: Data mapping method for 3G
SDI signals
The data mapping method for 3G SDI signals set
in [3G SDI OUT Level A/B] in the [VIDEO SET]
menu is displayed.
[HDMI Output]: Output for HDMI
The HDMI setting in [SDI/HDMI/i.LINK I/O
Select] in the [VIDEO SET] menu is displayed.
[i.LINK I/O]: Input and output for i.LINK
The i.LINK setting in [SDI/HDMI/i.LINK I/O
Select] in the [VIDEO SET] menu is displayed.
[Input Setting]: Recording source
The input source or SG output setting in [Input
Source Select] in the [VIDEO SET] menu is
displayed.
[Down Converter]: SD output down-converter
setting
The [Down Converter] setting ([Squeeze],
[Letterbox], [Edge Crop]) in the [VIDEO SET]
menu is displayed.
[23.98P Output]: 23.98P output mode
The [23.98P Output] setting (23.98PsF, 59.94i (2-
3 Pull Down)) in the [VIDEO SET] menu is
displayed.

Button/Remote Status Screen

[Assign Button]: Assignable button statuses
The functions assigned with the [Assign Button]
in the [OTHERS] menu to the respective
assignable buttons are displayed.
[IR Remote]: IR Remote Commander status
The [IR Remote] setting in the [OTHERS] menu
is displayed.

Battery/Media Status Screen

[Battery]: Battery charge remaining
The remaining charge level of the mounted
battery pack is displayed.
[Charge Count]: Repeated charge times
The number of times that the mounted battery
pack has been charged is displayed.
44 Showing the Status Screens
[Media A/Media B]: Remaining space, available
recording time, and estimated service life
(rewriting limit)
The remaining space of the SxS memory cards in
the respective card slots is indicated on the
meters.
At the right, the available time for recording if
done at the current bit rate is displayed, in
minutes.
The time indication will be "- - min" if no SxS
memory card or an invalid card is in the slot.
If the card is write-protected, a
to the right of the time indication.
The Life value is displayed only for an SxS
memory card which supports the life value
indication. It indicates the estimated remaining
usable period of the card (virgin status as 100%).
If an alarm is generated, make a backup of the
card as soon as possible and replace it with a new
card.
[USB Drv]: Remaining capacity of USB media
When USB media is connected, the remaining
recording capacity is displayed on the meter.
icon is shown