Others] Menu - Sony PMW-RX50 Operating Instructions Manual

TC/UB SET
Menu items Subitems and setting values Contents
TC Format
Setting the time
code format
Video formats
59.94i
59.94P
29.97P
23.98P
50i
50P
25P

[OTHERS] Menu

OTHERS
Menu items Subitems and setting values Contents
All Reset
Resetting to the
factory status
54 Setup Menu List
DF / NDF
Frame TC Format
setting
00 to 29 DF/NDF
switchable
(Fixed to DF in
Clock mode)
1) 2)
00 to 23 Fixed to NDF
00 to 24 Fixed to NDF
Execute/Cancel
Set the timecode format.
[DF]: Drop frame
[NDF]: Non drop frame
Note
The current video format/frame frequency determines
whether the mode is fixed either to DF or NDF (see below),
regardless of the [TC Format] setting.
1)
The frame digits in [Setting] is limited to 00, 04, 08, 12, 16,
and 20.
The frame at the beginning of recording is limited to 00, 04,
08, 12, 16, or 20.
As [23.98P Output] (page 51) in the [VIDEO SET] menu
becomes 2-3 pull-down 59.94i when recording (or standing
by to record) HQ 1920/23.98P other than when [23.98PsF]
is selected, the overlapping timecodes of frames output
from the SDI OUT 1/2 connectors are renumbered from 00
to 29.
2)
Even in [Clock] mode, the timecode is gradually shifted,
because it is counted by NDF.
As output from the SDI OUT 1/2 connectors becomes 2-3
pulled-down video when recording (or standing by to
record) HQ 1920/23.98P and other than [23.98PsF] is
selected for [23.98P Output] (page 51) in the [VIDEO SET]
menu, fields are created in which overlapping timecodes
are displayed on the screen.
Select [Execute] to reset the recorder to the factory status.