Ok Mark Fat/Hd - Sony PMW-RX50 Operating Instructions Manual

FLAG ADD] in the Clip Operation menu (page
37) on the thumbnail screen. When deleting a
flag, select [CLIP FLAG DELETE].
Note
Flagged clips are not protected. To protect clips from
deletion, select [LOCK CLIP] in the Clip Operation
menu (page 37) on the thumbnail screen. To remove the
protection, select [UNLOCK CLIP].
OK Mark
FAT/HD
Select [OK MARK ADD] from the Clip
Operation menu to add the OK mark, or select
[OK MARK DELETE] from the Clip Operation
menu to delete it.
Copying Clips
You can copy clips on an SxS memory card to
another SxS memory card.
Each clip is copied with the same name to the
destination SxS memory card.
Notes
• If there is another clip having the same name on the
destination SxS memory card, the clip is copied under
a name adding a single-digit number in parentheses to
the end of the original clip name.
The parenthetical number is the minimum value that
does not exist in the destination memory card.
Examples:
ABCD0002(1) if ABCD0002 exists
ABCD0002(2) if ABCD0002(1) exists
ABCD0005(4) if ABCD0005(3) exists
• When using FAT, you cannot copy a file 10 times or
more if clips with the same clip name followed by
parenthetical numbers (1) to (9) already exist on the
card.
• When using UDF or exFAT, you cannot copy a file
1000 times or more if clips with the same clip name
followed by parenthetical numbers (1) to (999) already
exist on the card.
• A warning message is displayed if there is not
sufficient space on the destination SxS memory card.
Replace the SxS memory card with one with sufficient
space.
• When copying an SxS memory card on which multiple
clips have been recorded, copying all clips to the end
may not be achieved, even if the destination card has
the same capacity as the source card, depending on
usage conditions, memory characteristics, etc.
Copying a specified clip
Select a clip on a thumbnail screen, then select
[COPY CLIP(A)] or [COPY CLIP(B)] from the
Clip Operation menu.
Copying clips collectively
Select [Clips] in [Copy All] (page 60) in the
[OTHERS] menu to copy clips on an SxS
memory card collectively to another SxS memory
card.
If the memory card contains clips of both HD and
SD Mode, only the clips of the currently selected
mode are copied. This is convenient when you
wish to extract clips of the same mode only.
Copying to USB media
When USB media is connected, select a clip on a
thumbnail screen and select [COPY CLIP (USB)]
from the Clip Operation menu to copy the clip to
the USB media.
You can also copy all SxS memory card clips to
USB media by selecting [USB SET] > [Copy To
USB] in the [OTHERS] menu. This copies only
clips for the selected mode in the same way as
selecting [Copy All] in the [OTHERS] menu.
Deleting Clips
Select [DELETE CLIP] from the Clip Operation
menu.
Note
Clips with an OK mark and flagged clips set to [LOCK
CLIP] cannot be deleted.
To delete them, release the OK mark or the [LOCK
CLIP] setting before performing the delete operation.
Deleting clips collectively
Select [All Clips DEL] in [Clip] (page 59) in the
[OTHERS] menu.
Notes
• If the memory card contains clips of both HD and SD
Mode, only the clips of the currently selected mode are
deleted.
• Clips with an OK mark and flagged clips set to [LOCK
CLIP] cannot be deleted.
EXPAND CLIP Screen
In UDF, exFAT and FAT HD Mode, the
[EXPAND CLIP] screen permits you to divide a
clip into 12 blocks of equal duration and show a
thumbnail image of the first frame of each block
on the screen.
In FAT SD Mode, the [EXPAND CLIP] screen
shows the thumbnail images of the first frames of
the segment files only for a clip segmented
because its file size exceeded 2 GB.
Clip Operations 39