Sony PMW-RX50 Operating Instructions Manual page 60

OTHERS
Menu items Subitems and setting values Contents
Unlock All Clips
Index Picture Pos
Find Mode
2)
Copy All Clips
Setting for
General Files
collective copy of
clips and/or
Clips&General
"General" files
Format Media Media(A)
Formatting SxS
memory cards
Media(B)
Plan.Metadata Load/Slot(A) or Load/Slot(B)
Setting planning
metadata
Load/USB
(UDF and exFAT mode)
Execute/Cancel
60 Setup Menu List
Execute/Cancel
0sec to 10sec (0sec)
Clip / Rec Start
Execute / Cancel
Execute / Cancel
Execute / Cancel
Select [Execute] to remove protection from all clips. (UDF
and exFAT)
Set the image for viewing thumbnails. This selects the time
difference from the start of the clip.
Set the action for when you press the PREV button/NEXT
button. (UDF and exFAT)
[Clip]: Move to the start of the current clip/next clip.
(Pressing the PREV button from the start of a clip will
move to the start of the previous clip.)
[Rec Start]: Move to the previous [Rec Start Essence Mark]/
the next [Rec Start Essence Mark].
To copy all clips on an SxS memory card to the other.
To copy all files in the "General" folder on an SxS memory
card to the other.
To copy all clips and files in the "General" folder on an SxS
memory card to the other.
Select [Execute] to format the SxS memory card in slot A
with the selected file system (UDF/exFAT/FAT).
Select [Execute] to format the SxS memory card in slot B
with the selected file system (UDF/exFAT/FAT).
To load planning metadata from the SxS memory card in slot
A or B.
Selecting [Execute] displays the list of the planning metadata
files stored on the SxS memory card in slot A or B. Specify a
file, select [Load] then [Execute] for loading.
Notes
• The file list displays up to 64 files. Even if the total number
of planning metadata files is 64 or less, all of the planning
metadata files may not appear if the directory where they
are located in the SxS memory card (General/Sony/
Planning) contains 512 or more files.
• After you start loading, do not remove the SxS memory
card until the completion message is displayed.
Loads planning metadata from the USB flash drive connected
to the external device connector.
Select [Execute] to show the list of the planning metadata
files stored in the USB flash drive and select a file to be
loaded.