Table of Contents
Advertisement
OTHERS
Menu items
Subitems and setting values Contents
Assign Button
<1>, <2>, <3>, <4>, <5>
Assigning
functions to the
assignable buttons
Tally
Front
Setting the tally
lamps
Hours Meter
Hours (Sys)
Displaying the
Hours (Reset)
hours meter
Reset
IR Remote
Activating/
deactivating the
Remote
Commander
56
Setup Menu List
Off / Last Clip DEL / IR
Remote / Shot Mark1 / Shot
Mark2 / OK Mark / Clip Flag
OK / Clip Flag NG / Clip Flag
Keep / Clip Continuous Rec /
Clip Update / Play & SDI Rec /
LCD Adjust / Color Bars On/
Off / Quick Backup / USB
Thumbnail View / Partial
Playback/ STATUS / LCD
BRIGHT / DISPLAY
<1> On
<2> Off
<3> STATUS
<4> LCD BRIGHT
<5> DISPLAY
High / Low / Off
Execute/Cancel
On / Off
Assign a function to the ASSIGN 1/2/3/4/5 buttons. (The
selectable functions are shared.)
[Off]: No function
[Last Clip DEL]: Execute the last clip delete (retake) function
[IR Remote]: Enable/disable the IR Remote Commander.
[Shot Mark1]: Add shot mark 1 (HD Mode only).
[Shot Mark2]: Add shot mark 2 (HD Mode only).
[OK Mark]: For adding or removing an OK mark (HD Mode
only, not valid via the thumbnail screen).
[Clip Flag OK]: Enable/disable OK flags for clips during
recording and playback (UDF and exFAT).
[Clip Flag NG]: Enable/disable NG flags for clips during
recording and playback (UDF and exFAT).
[Clip Flag Keep]: Enable/disable Keep flags for clips during
recording and playback (UDF and exFAT).
[Clip Continuous Rec]: Switch the Clip Continuous
Recording function on/off.
[Clip Update]: Update the management file on the selected
SxS memory card (not supported in continuous recording
mode).
[Play & SDI Rec]: Start playback and REC trigger output, or
pause playback and stop REC trigger output (when using
the CBK-WA100).
[LCD Adjust]: Switch the LCD Adjust function level bar
indication (brightness adjustment t contrast adjustment
t off ).
[Color Bars On/Off]: Switch the color bars output on/off.
[Quick Backup]: Backup all clips from the selected SxS
memory card to a new folder on USB media.
[USB Thumbnail View]: Display the USB media thumbnail
screen.
[Partial Playback]: Playback between In-point and Out-point
[STATUS]: Display the status screens on LCD monitors and
external monitors.
[LCD BRIGHT]: Adjust the backlight brightness for the LCD
monitor.
[DISPLAY]: Enable/disable display of the recorder's status
information and settings on the LCD monitor's video.
Set the brightness of the tally lamp.
The non-resettable accumulated time of use is displayed.
The resettable accumulated time of use is displayed.
Select [Execute] to reset the [Hours (Reset)] value to 0.
Set to [On] to activate remote control operations from the
supplied IR Remote Commander.
Note
The setting automatically returns to [Off] when the recorder is
turned off.
Hide quick links:
Advertisement
Table of Contents
