Updating Your Phone's Configuration - Polycom SoundStation Duo Installation Instructions And User Manual

Updating Your Phone's Configuration

To change the backlight intensity:
Press , and then select Settings > Basic > Backlight Intensity.
1
From the Backlight Intensity screen, select Backlight On Intensity.
2
From the Backlight On Intensity screen, select the intensity you want.
3
(The default is High.)
If you selected a new intensity, press the Save soft key. If you did not
4
select a new intensity, press the Back soft key.
From the Backlight Intensity screen, select Backlight Idle Intensity.
5
From the Backlight Idle Intensity screen, select the intensity you want.
6
(The default is Low.)
If you selected a new intensity, press the Save soft key. If you did not
7
select a new intensity, press the Back soft key.
From the Backlight Intensity screen, select Maximum Intensity.
8
From the Maximum Intensity screen, press the Up or Down soft keys to
9
increase or decrease the maximum intensity the screen can display, and
then press the Ok soft key.
To change the Backlight Timeout:
Press , and then select Settings > Basic > Backlight Timeout.
1
From the Backlight Timeout screen, choose the number of seconds the
2
phone will be idle before the backlight dims. (The default is 40 seconds.)
Press the Save soft key.
3
If your phone is connected to the network, your system administrator may
remotely update your phone settings, and then ask you to update your phone
configuration using your phone's menu.
To update your phone's configuration:
Press , and then select Settings > Basic > Update Configuration.
1
The message 'Are you sure?' displays.
If you still want to update the configuration, press the Yes soft key.
2
The configuration is updated. Your phone may restart, depending on the
configuration parameters that have changed. If the phone doesn't restart,
press to return to the idle screen.
Using Your Conference Phone in PSTN Mode
53