Integrating With Microsoft Lync Server; Controlling What Is Heard; Changing The Ring Tone - Polycom SoundStation Duo Installation Instructions And User Manual

Polycom® SoundStation® Duo Conference Phone User Guide
Note

Integrating with Microsoft Lync Server

Controlling What is Heard

Changing the Ring Tone

112
Your phone shows shared line status as described in the following table.
Shared Line Status
All phones that you share a line with are
idle.
A phone you share a line with has an
active call.
A phone you share a line with has a
held call.
You can't forward or reject calls on shared lines.
•
Enabling Do Not Disturb on shared lines disables ringing only. The call will still
•
display on your screen, and you can still choose to answer the call.
Your system administrator can configure your phone to work with Microsoft
Lync Server and communicate with others using Microsoft Lync. From your
phone, you can invite, join, control, and monitor local multipoint audio
conferences. For more information on integrating with Microsoft Lync Server,
see your system administrator, or refer to Using Polycom Phones in a Microsoft
Lync 2010 Environment, available from the
You can change what is heard by doing the following:
• Changing the ring tone.
• Selecting unique ring tones for contacts.
• Adjusting the volume of the speaker.
• Adjusting the volume of the ring tone.
• Muting the microphones so the far site(s) can't hear you.
You can select from many different ring tones to distinguish your phone from
your neighbor's.
Indicator Lights When Your Phone is
Idle
None
Solid red
Solid or flashing red (depending which
phone initiated the hold).
SoundStation Duo Support page.