10. Loosen the clamp and pull the end of the
drain hose from the tub.
Drain Hose
11. Remove the three T-20 torx screws from
the drive motor shield and remove the
shield from the bottom of the tub.
Motor Shield
12. Remove the three 1/2" hex-head bolts
from the rear counterweight and remove
the weight.
Rear Counterweight
13. Remove the two rear shock absorbers
from the tub. To remove a shock absorber:
a) Pry the locking tab down with a small
screwdriver.
Align Tabs
With Slots
Locking Tab
b) Twist the top section so the tabs align
with the slots in the tub.
c) Lower the top of the strut down through
the slot, and rotate the shock absorber
against the floor of the cabinet.
Continued on the next page.
4-25