REMOVING THE HEATING ELEMENT RELAY
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug washer or disconnect power.
2.
Turn off the water supply to the washer.
3.
Remove the three T-20 hex-head torx
screws from the toe panel and remove the
panel.
Toe Panel
Screws
Heating Element Relay
4-17
4.
Rotate the element relay holder so you
can access the relay board.
5.
Unhook the wires from the holder, then lift
the relay, and unhook it from the slots in
the back of the holder.
6.
Press the locking arms and disconnect the
wire connectors from the relay.
Wire
Connectors
Lift The
Relay To
Remove It
Unhook Wires