CABINET ASSEMBLY
1. Fix the motor on the top plate using Motor fixed rod (A)
that with
Φ
12 ring and cotter pin(B). Using M5X12mm Pan
head screw(C) and cable clamp(D) to fix the motor power
cord(E).
SEE FIG. 1
2. Fasten the RIGHTSIDE PLATE(F) and LEFTSIDE
PLATE(G) using 8pcs M6x12mm Hex HD Flange Screw(I)
and 8pcs M6 Hex Head Flange Nut. Then, fasten 2pcs M8
nuts onto each leveling feet (H). SEE FIG.2
ASSEMBLY
3. Using 2pcs M8x16mm Carriage bolt (J) and 2pcs Hex
Flange Nut to lock the Rotation Wheel Assy (K). SEE
FIG. 3
FIG.3
FIG.1
4. Fix Front Door Plate / Rear Door Plate onto Cabinet :
using 16pcs Hex Soc HD SCR M6X16mm(N) and 16pcs
Spring Washer M6 to lock the Front Door Plate(L) and
Rear Door Plate(M). SEE FIG.4
FIG.4
FIG.2
Take care to support the motor when turning the base
right side up. Failure to do so can cause the motor to
slam into the side of the cabinet damaging the motor,
cabinet or both.
16