Setting The Scanning Speed; Registering The User Channel - JRC JSS-296 Instruction Manual

3.4.3.5 Setting the scanning speed

The scanning time for each channel is settable between 0.3 to 5 seconds.(multiple of 0.1 second)
Example of 0.3 seconds.
MENU
1. Press
"SCAN SPD" blinks.
2. Press
ENT
The current value "10" blinks.
3. Turn the Jog Dial until desirable scanning
time appears or manually input the value
from keypad.
4. Press ENT
The scanning time is fixed to 0.3 seconds.
3.4.3.6

Registering the user channel

You use frequently can be registered as a user channel up to 200, channel number 1 to 200.
Example of registration for RX frequency 4357.0
kHz / TX frequency 4065.0 kHz, communication
mode is TEL, Channel Label Registration is
MITAKA1 at the user channel number 1.
1. Make sure that a objective communication
mode is set and press
turn the Jog Dial until "USR MEMO" blinks.
ENT
2. Press
Select the user channel number with the Jog
Dial or keypad.
3. Press ENT
Select the communication mode with the Jog
Dial (*1) .
Procedure
, then turn the Jog Dial until
.
.
Procedure
and then
MENU
.
.
Examples of display on the LCD
Examples of display on the LCD
3-15