Table of Contents
Advertisement
Procedure
1. From the "MENU#1-EDIT&CALL" screen, press
The "POSITION REQUEST" screen is displayed.
The following items have been set in this example.
Entering the respective items:
After selecting each item, press
(1) Address: Use the numerical keys (
(2) Call TX/RX freq: Use the
2. Press
.
CALL
The following screen is displayed and the message is transmitted.
If the tuner is not tuned to the transmission frequency, the "tuner mismatch!!" warning message is
Note
displayed. Press
When the transmission is completed, the following screen is displayed. After a brief interval, operation
returns to the "MENU#1-EDIT&CALL" screen.
To discard the message and quit without sending it, press
Note
To store a message without sending it, press
3-58
POSITION REQUEST
Address
Call TX/RX freq
XXXXXXXXX
Address
Call TX/RX freq
4,208.0 4,219.5 kHz
ENT
to confirm the selection.
(ship or coastal station).
and
Alternatively, use the numerical keys (
specify a frequency.
POSITION REQUEST
TX frequency
TX date&time
to tune the tuner, then transmit the message.
ENT
POSITION REQUEST
TX frequency
TX date&time
06.Sep.2001(Thu) 01:30
, and then press
9
XXXXXXXXX
4,208.0/4,219.5 kHz
to
) to enter the address of the receiving station
0
9
keys to select one of the preset frequencies.
Transmitting
4,208.0 kHz
06.Sep.2001(Thu) 01:30
Send Completed
4,208.0 kHz
FUNC
(SAVE).
FUNC
9
.
ENT
to
, and
) to directly
.
0
9
(QUIT).
4
Hide quick links:
Advertisement
Table of Contents
