Table of Contents
Advertisement
Procedure
1. From the "MENU#1-EDIT&CALL" screen, press
The "DISTRESS CALL" screen is displayed.
DISTRESS CALL
Address
Nature
Dist-position
Dist-UTC
Dist-telecomm
End of sequence
Call TX/RX freq
The following items have been set in this example.
Note
* Not edit the these setting.
Entering the respective items:
After selecting each item, press
(1) Nature
Dist-telecomm: Use the
(2) Dist-position: Use the
(3) Dist-UTC:
(4) Call TX/RX freq: Use the
2. Press
DISTRESS
a continuous tone).
The following screen is displayed and the message is transmitted. The same distress message is sent 5
times in succession.
On completion of the transmission, the following screen is displayed. Transmission of the distress call is
repeated when the displayed time has counted down to zero.
Press
STOP
Note
To store the message without sending it, press
To discard the message and quit without sending it, press
The distress call is sent repeatedly until a distress call acknowledgement is received.
3-40
XXXXXXXXX
UNDESIGNATED DIST
12 34'N123 45'E
01:20
J3E TEL
EOS
2,187.5 / 2,187.5 kHz
* Address
Nature
Dist-position
Dist-UTC
Dist-telecomm
* End of sequence
Call TX/RX freq
ENT
and
and
ship's position using the numerical keys (
Use the numerical keys (
and
the numerical keys (
for at least 3.5 seconds (until the intermittent alarm tone changes to
DISTRESS CALL
TX frequency
TX date&time
06.Sep.2001(Thu) 01:30
DISTRESS CALL
NEXT DISTRESS CALL AFTER 3.7 min
to cancel the DISTRESS transmission.
, and then press
3
Transmissible
XXXXXXXXX
UNDESIGNATED DIST
12 34'N123 45'E
01:20
J3E TEL
EOS
2,187.5/2,187.5 kHz
to confirm the selection.
keys to select the items.
keys to determine the direction, and then input the
to
) to enter the time.
0
9
keys to select one of the preset frequencies, or use
to
,and
0
9
Transmitting
2,187.5 kHz
2,187.5 kHz
FUNC
(SAVE).
9
FUNC
.
ENT
Use
and
scroll the screen.
to
).
0
9
) to specify a frequency directly.
.
1/5
(QUIT).
4
to
Hide quick links:
Advertisement
Table of Contents
