This chapter describes mainly the way to use the JSS-296.
ATTENTION
Regarding the JSB-196GM Radiotelephone or NCT-196N DSC/NBDP Modem operations in detail,
see the specialized instruction manuals for them respectively.
3.1 System Standby
3.1.1
Turning the Power ON
1. Turn on the AC and DC switches of NAH-692 Power Amplifier.
The other components except for JSB-196GM Radiotelephone are turned ON
simultaneously. After that the LCD on the front panel of the NAH-692 Power Amplifier
shows as follows.
AC Volt
DC Volt
2. Turn on the POWER switch of JSB-196GM Radiotelephone. (Note that it is
necessary to keep the POWER switch press for 1 sec at least to turn it on.)
Keep the NCT-196N DSC/NBDP Modem power switch turn ON because of the
Note
obligation to watchkeep 24 hours a day while at sea.
3.1.2
Turning the Power OFF
1. 1. 1. 1. Turn off the AC and DC switches of NAH-692 Power Amplifier.
Turn off the AC and DC switches of NAH-692 Power Amplifier.
Turn off the AC and DC switches of NAH-692 Power Amplifier.
Turn off the AC and DC switches of NAH-692 Power Amplifier.
The other components including NCT-196N DSC/NBDP Modem are turned
Note
OFF simultaneously. Therefore don't turn OFF the switches while at sea
because of the obligation to watchkeep 24 hours a day.
3. OPERATIONS
221V
24.2V
3-1