Table of Contents
Advertisement
The NCT-196N enables an operator to create and edit messages for transmission.
Procedure
1.
Confirm that the "DSC watching" screen is displayed.
DSC watching
12 34'N123 45'E SPEED:12.4KT at 01:26
Self-ID = XXXXXXXXX
2.
Press
MENU
The "MENU #1-EDIT&CALL" screen is displayed.
MENU #1-EDIT&CALL
1.Individual call
2.Acknowledgement call
3.Distress call
4.Distress relay call
5.Auto/semi-auto call
6.All ships call
7.Group call
8.Area call
9.Position request
10.Polling call
11.Test call
3.
Press
3
The "Distress Call" screen is displayed as follows. Then setup these items except for "Address"
and "End of sequence" properly.
DISTRESS CALL
Address
Nature
Dist-position : 31 00'N 135 00'E
Dist-UTC
Dist-telecomm : J3E TEL
End of sequence: EOS
Call TX/RX freq: 2,187.5/ 2,187.5 kHz
4.
Open the cover on the left and press
5.
The following screen is displayed and the distress transmission is started.
If a printer is connected, it prints out the distress message.
The distress message is transmitted for 5 times successively.
DISTRESS CALL
TX frequency : 2,187.5 kHz
TX date&time :06.Sep.2001(Thu) 01:26
Note
• If break the distress transmission, press
Transmitting Distress Calls 3
06.Sep.2001(Thu) 01:26
.
and then
to select "3. Distress call".
ENT
: XXXXXXXXX
: UNDESIGNATED DIST
: 01:26
[UTC]
Select no.
Use
Transmissible
DISTRESS
for 3.5 seconds at least.
Transmitting
1/5
.
STOP
and
to scroll the screen.
Use
and
scroll the screen.
to
xiii
Hide quick links:
Advertisement
Table of Contents
