JRC JSS-296 Instruction Manual page 139

Mf/hf radio equipment
Hide thumbs Also See for JSS-296:
Table of Contents

Advertisement

3.
Turn the cassette knob of the new ribbon cassette cartridge counterclockwise to
increase the tension of the ribbon.
4.
Manually, move the printing head to the home position (left side) and place the
ribbon cassette cartridge in the printer so that the ribbon is positioned between
the ribbon mask and the printing head. In this case, make sure that the ribbon feed
axis is inserted through the hole under the ribbon cassette knob.
Lightly press the ribbon cassette cartridge at both ends.
Note
Turn the cassette knob again to increase the tension of the ribbon.
Confirm that the ribbon is positioned properly in front of the printing head.
5.
Close the printer cover
3-103

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents