Table of Contents
Advertisement
Procedure
1. From the "MENU#1-EDIT&CALL" screen, press
The "POLLING CALL" screen is displayed.
The following items have been set in this example.
Entering the respective items:
After selecting each item, press
(1) Adress: Use the numerical keys (
(2) Call TX/RX freq: Use the
2. Press
.
CALL
The following screen is displayed and the message is transmitted.
If the tuner is not tuned to the transmission frequency, the "tuner mismatch!!" warning message is
Note
displayed. Press
When the transmission is completed, the following screen is displayed. After a brief interval, operation
returns to the "MENU#1-EDIT&CALL" screen.
To discard the message and quit without sending it, press
Note
To store a message without sending it, press
3-60
POLLING CALL
Address
Call TX/RX freq
XXXXXXXXX
Address
Call TX/RX freq
4,208.0 4,219.5 kHz
to confirm the selection.
ENT
(ship or coastal station).
and
Alternatively, use the numerical keys (
Specify a frequency.
POLLING CALL
TX frequency
TX date&time
06.Sep.2001(Thu) 01:30
to tune the tuner, then transmit the message.
ENT
POLLING CALL
TX frequency
4,208.0 kHz
TX date&time
06.Sep.2001(Thu) 01:30
1
0
XXXXXXXXX
4,208.0 4,219.5 kHz
0
to
9
) to enter the address of the receiving station
keys to select one of the present frequencies.
Transmitting
4,208.0 kHz
Send Completed
FUNC
(SAVE).
FUNC
9
, and then press
ENT
to
,and
) to directly
0
9
.
4
(QUIT).
.
Hide quick links:
Advertisement
Table of Contents
