Table of Contents
Advertisement
3. Press
again.
MENU
The "MENU#2-READOUT&SETUP" screen is displayed.
MENU #2 -READOUT&SETUP
1.Received distress message readout
2.Received others message readout
3.Setup
4.Self test
4. Press
, and then press
3
The "SETUP" screen is displayed.
SETUP
1.Date&time edit
2.Position edit
3.Calling frequency registration
4.Address registration
5.Distress setup
6.Others alarm setup
7.Automatic acknowledgement setup
8.Scanning setup
9.Watchkeeping receiver setup
5. From the "SETUP" screen, press
The "DATE&TIME EDIT" screen is displayed.
DATE&TIME EDIT
Date (dd:mm:yy):06.05.00
Time (hh:mm)
Time difference:-05:00
Display time
6. Enter the respective settings.
When the display time is set to "LT", enter the difference to the UTC in the "Time difference" item.
Use the cursor keys (
"UTC/LT" for the "Display time".
7. On completion of entering the data, press
Operation returns to the "SETUP" screen.
Note
If you press
ENT
:19:23
:UTC
and
) to switch between "+/-" for the "Time difference" and between
FUNC
, and then press
Select no.
.
Select no.
, and then press
1
, and then press
FUNC
4
(QUIT), the settings are discarded.
Use
and
Use
and
to scroll.
.
ENT
Use
and
to scroll.
(SAVE).
9
to scroll.
3-5
Hide quick links:
Advertisement
Table of Contents
