Pa Operations; Ac/Dc Power Source Voltage Checking; Dc (Battery) Charge/Discharge Current Checking - JRC JSS-296 Instruction Manual

3.7 PA operations

The NAH-692 Power Amplifier connected to JSB-196GM can be used basically without any settings after
installation. However for checking such as output power, voltages or currents or for setting such as alarm or
charge mode, the NAH-692 Power Amplifier has functions as described below.
3.7.1

AC/DC power source voltage checking

Procedure
1. Press Menu button and turn the dial to "AC/DC VOLTAGE" menu on the LCD.
AC,DC VOLTAGE
2. Press ENT button.
The menu is selected and LCD shows the AC/DC voltages.
AC Volt
DC Volt
3. After completed, press Menu button again to return to menu selection.
3.7.2

DC (Battery) charge/discharge current checking

Procedure
1. Press Menu button and turn the dial to "DC CURRENT" menu on the LCD.
DC CURRENT
2. Press ENT button.
The menu is selected and LCD shows the value of DC (Battery) charge/ discharge current.
DC CURR
(- : DISCHG,+ : CHG)
3. After completed, press Menu button again to return to menu selection.
221V
24.2V
+2.5A
3-87