Table of Contents
Advertisement
3.
Set the DIP switch to desired mode
The following diagrams describe the relation between each DIP switch position and the content of each
setting.
4.
When settings are completed, put the partition cover back in its place, set up the
ribbon cassette, and then close the printer cover.
5.
While pressing NLQ turn the power ON.
After initialization is carried out, the selected function and current setting status of the DIP switch are
printed.
When printing under the current setting status, the printer is set to an off-line state. When the test
Note
pattern is completely printed out, it is automatically set to an on-line state.
3-106
Hide quick links:
Advertisement
Table of Contents
