3.4 Radiotelephone operations
3.4.1
Turning the Power ON / OFF
Never touch the antenna terminal, grounding terminal or counterpoise when the
JSB-196GM is turned ON. Doing so, may cause electrical shock.
Place Antenna Tuner NFC-196, antenna and counterpoise in position where no one
touches them. Doing not so, may cause electrical shock.
3.4.1.1
Turning the Power ON
Press
on the front panel until the channel and frequencies are displayed as follows:
POWER
Figure 5.1 Initial display on the LCD (immediately after the equipment is powered on)
3.4.1.2
Turning the Power OFF
Press
until LCD disappears.
POWER
Note
The latest frequency and set-up state information such as communication mode are
stored in memory when the equipment is turned OFF. It will be set automatically when
the equipment is powered on again except the following items and these items will be
set to as follows:
⋅ Built-in loudspeaker ON/OFF (ON as default)
⋅ Squelch value (0 as default)
CAUTION
RX FREQ
RDY
TX FREQ
, , , ,
. . . .
KHz
, , , ,
. . . .
KHz
NR
AGC
3-7