Basic Dsc Operations - JRC JHS-770S Instruction Manual

Operation
4.3

Basic DSC operations

When calling stations, the DSC is also available for a routine/ safety/ urgency or a distress call in
addition to the calling by radiotelephone described above.
basic DSC routine calls and for the AIS-linked DSC calls.
4.3.1 Routine calls to a coast station
A DSC call to a coast station is initiated as follows.
■ ■
Procedure
1 .
1 .
1 .
Press the
MENU
hierarchical menus, select the 1.1 Coast
station call.
The address inputting screen will be displayed.
If entered previously, the address will be
appeared as a default value.
2 .
2 .
2 .
Press ENT to display the alphabetically
sorted coast station list. After selecting the
initial letter and pressing ENT, select the
desired coast station with the jog dial.
- This list can be registered in the
Note
menu 9.4.1 Coast station list.
- When inputting the MMSI
manually, press the
key to return to the previous
screen and input it using the
numeric keypad.
3 .
3 .
3 .
After inputting the address, press ENT.
Confirm the address.
4 .
4 .
4 .
If the address is correct, press ENT.
The sending confirmation screen will appear.
The controller displays by default only
Note
the edited information in the call setup
as shown at right.
4-14
key, and through
CANCEL
This section describes the procedures for
1.1)Coast station call
Address :[00
[ OK ]
Coast station list
NAME MMSI
Argentina 001234567
Australia 002222222
Azerbaijan 003333333
Bolivia 004444444
Bangladesh 005555555
Select the initial of the name.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
1.1)Coast station call
Address :[001234567]
[ OK ]
1.1)Coast station call
Address :001234567
[Call]
]
[Cancel]
[A]
[Cancel]
[Cancel]