6 INSPECTION AND MAINTENANCE
The peripheral device cannot
communicate to the Motion controller.
Is the
operating system software
installed to the Motion
CPU module?
YES
Are all the
connecting cable connected to
the connecting connector
correctly?
YES
Can the CPU
communicate with the
SW6RN-GSV P by replacing the
connecting cable?
NO
Is the
connection type
SSCNET?
NO
Is the
connection type
USB ?
YES
1)
(h) Flowchart for when the peripheral device cannot communicate
to the Motion controller.
The following shows the flowchart when the Motion CPU cannot
communicate with the SW6RN-GSV P during the power supply ON.
NO
Install the operating system software.
NO
YES
Is the
YES
connecting setting
correct?
Explain the error symptom and get
advice from our sales representative.
Connect the connecting cable correctly.
NO
NO
YES
NO
6 - 20
Can the CPU
communicate with the
SW6RN-GSV P?
The connecting setting is SSCNET.
Can the CPU
communicate with the
SW6RN-GSV P?
Completion
@@
YES
YES