Buttons - CCTV Intelligent Network Keyboard User Manaul

User's Manual

Buttons

NOTE: In the operation explanation for each button, "→" indicates that the buttons are pressed sequentially,
and "&" indicates the buttons are pressed together.
Operation Command
NOTE: Devices should be registered on the network keyboard and set up properly to perform the commands.
Button Designation
Number (1 to 9)
Number (0)
Shift
ESC
Monitor
Pane
Device
Camera
Macro
– / +
Function (1 to 8)
44
Device number or ID →
a monitor, pane, device, device or camera to control, or macro to perform.
→ → : Starts panic recording of all camera channels of
DEV
all devices registered on the network keyboard.
→ →
DEV SHIFT &
of all devices registered on the network keyboard.
→ →
DEV SHIFT &
channels of all devices registered on the network keyboard.
→ Button : Performs the secondary function of the button if the
SHIFT
button supports two functions.
& : Locks buttons of the network keyboard.
SHIFT ESC
& : Enters the LCD menu.
SHIFT
: Cancels the command during the command operation or returns
ESC
to the previous menu during the menu configuration.
Monitor ID →
MON
Pane No. or ID →
PANE
Device No. or ID →
Camera No. or ID →
Macro ID →
MACRO
Selects the previous or next monitor, pane, device or camera during the
command operation.
Navigates through setup menus or adjust number's value during menu
configuration.
Performs the preset function.
Operation
, ,
MON PANE DEV
: Stops panic recording of all camera channels
: Deactivates alarm out of all alarm-out
: Allows you to select the monitor.
: Allows you to select the selected pane.
: Allows you to control the selected device.
DEV
: Allows you to control the selected camera.
CAM
: Performs the selected macro.
, or : Selects
CAM MACRO