Cancelling Command; Ptz Camera Control; Dvr System Control - CCTV Intelligent Network Keyboard User Manaul

Cancelling Command

Pressing the button after pressing an ID or number button cancels the entry and returns to the previous
ESC
command, and pressing the
to the default screen.

3.2 PTZ Camera Control

You can control PTZ cameras via RS485 connection. Refer to Appendix – Buttons (p. 44) for details on
each control button.

3.3 DVR System Control

You can control DVRs and PTZ cameras connected to the DVRs via RS485 or network connection. Refer
to Appendix – Buttons (p. 44) for details on each control button.
button after pressing a command button cancels the command and returns
ESC
1. Press the camera ID after selecting a monitor.
2. Pressing the button cancels the entry and returns to the previous command.
ESC
3. Press the camera ID.
4. Press the button.
CAM
5. Video from the selected camera is displayed in the monitor. Pressing the
button cancels the command and returns to the default screen.
6. You can give a new command.
1. Press the camera ID. If you control the camera in the Basic mode, press the
485 ID instead of the camera ID.
2. Press the button. You can control the camera by using PTZ control buttons.
CAM
Network Keyboard
ESC
19