CCTV Intelligent Network Keyboard User Manaul page 33

Example II
You can control a DVR in a specific pane of the main monitor with pressing a pane ID without pressing
the monitor ID. For this control, a unique pane ID should be set up to each pain of a main monitor connected
to the MMX (Run the INIT program → Connect to the Remote Setup menu of the network keyboard →
Set up the main monitor).
1. Press the pane ID.
2. Press the button. You can control the MMX that the monitor is connected
PANE
by using the device control buttons.
3. Press the DVR ID.
4. Press the button. The DVR's main monitor screen is displayed in the
DEV
selected pane, and you can control the DVR by using device control buttons.
5. Press the camera number of the DVR.
6. Press the button. Video from the camera is displayed in the selected pane,
CAM
and you can control the camera by using PTZ control buttons if the camera is
a PTZ camera.
Network Keyboard
27