Table of Contents
Advertisement
User's Manual
Locking Buttons
Pressing the
and
SHIFT
the buttons to be locked by using the LCD menu or the INIT program when there is no action on the network
keyboard during the preset time since the last action. This function does not work if the User password is
not set up or the button lock time is set to Never. Refer to Chapter 4 — LCD Menu Configuration, 4.3
Setup Menu, System (p. 30) or Chapter 5 — Remote Configuration, 5.1 System (p. 33) for details
on setting up the user password or button lock function.
The network keyboard does not receive any commands and any given commands are cancelled when the
buttons are locked. Unlocking the buttons requires entering the User password.
18
Indicates the pane number or ID, and then the
command is supported only for a main monitor, and you can control a
PANE
device that a main monitor is connected.
When giving
MON
monitor, and the
PANE
screen.
When giving a
PANE
set in the network keyboard, and the
letter, P, on the LCD screen. The pane ID provides a shortcut to a specific
pane. When giving a 'pane ID' →
functions the same as when giving 'main monitor ID' →
→
commands.
PANE
Indicates the device ID, and then the
the selected device.
Indicates the camera number or ID, then the
control the selected camera.
When giving
DEV
and the
command is displayed as a small letter, c, on the LCD screen.
CAM
When giving
MON
the camera ID set in the network keyboard, and the
as a capital letter, C, on the LCD screen.
buttons together locks the buttons of the network keyboard. You can set up
ESC
1. Press the
and
SHIFT
2. The buttons are locked. Press the
3. Press the user password and press the
4. The buttons are unlocked.
→
commands, press the pane number of a main
PANE
command is displayed as a small letter, p, on the LCD
command without the
PANE
PANE
DEV
→
commands, press the camera number of the device,
CAM
→
commands or
CAM
button together.
ESC
button to unlock the buttons.
button is selected. The
PANE
command, press the pane ID
MON
command is displayed as a capital
command, the network keyboard
→ 'pane number'
MON
button is selected. You can control
button is selected. You can
CAM
→
commands, press
PANE
CAM
command is displayed
CAM
button.
Advertisement
Table of Contents
