Controlling Camera On Specific Pane - CCTV Intelligent Network Keyboard User Manaul

User's Manual

Controlling Camera on Specific Pane

Example I
You can control a camera in a specific pane of the main monitor.
Example II
You can control a camera in a specific pane of the main monitor with pressing a pane ID without pressing
the monitor ID. For this control, a unique pane ID should be set up to each pain of a main monitor connected
to the MMX (Run the INIT program → Connect to the Remote Setup menu of the network keyboard →
Set up the main monitor).
24
1. Press the main monitor ID.
2. Press the button. You can control the MMX that the monitor is connected
MON
by using the device control buttons.
3. Press the pane number.
4. Press the button.
PANE
5. Press the camera ID.
6. Press the button. Video from the camera is displayed in the selected pane,
CAM
and you can control the camera by using PTZ control buttons if the camera is a
PTZ camera.