CCTV Intelligent Network Keyboard User Manaul page 21

5.3. Click the Digital Video Recorder pull-down menu in the
device list, and then the registered DVR's pull-down menu.
A list of monitors and cameras supported in the DVR is
displayed.
[ID] Main Monitor: Displays the monitor ID and type.
[ID] Spot Monitor No.: Displays the monitor ID,
monitor type and the Spot Out number of the DVR.
[ID] 'Camera Name': Displays the ID and name of
the camera.
5.4. Click a camera in the list, and then the Edit button. Set up the camera
information.
ID: The network keyboard assigns the ID automatically when the DVR
is registered, and you can change the ID. The ID will be used to
distinguish the camera from other cameras when controlling it by using
a network keyboard, so each camera should have its own unique ID.
Type: Set up the camera type.
Fixed: Select if the camera is not a PTZ camera.
−
PTZ Camera: Select if the camera is a PTZ camera, and then select
−
the device that the PTZ camera is connected.
6. Go to the following menus: Setup → Remote Setup → Device
→ Setup
Click Matrix in the device list, and then the Scan or Add button
to register the master MMX.
6.1. Set up the registration information.
ID: The network keyboard assigns the ID automatically when the MMX
is registered, and you can change the ID. The ID will be used to
distinguish the MMX from other devices when controlling the MMX by
using a network keyboard, so each device should have its own unique ID.
Slave MMX: Select the number of slave MMXs daisy-chained to the
master MMX.
Spot MMX Monitor: Select the number of spot monitors connected to
spot MMXs which are connected to the master MMX and slave MMXs.
IP Address, Control Port, User ID, Password: Enter the IP address,
port number, user ID and password for the connection to the MMX.
Network Keyboard
15