User's Manual
5.4 Function
Macro
NOTE: A macro is a preset single instruction that calls a complete series of commands to perform a particular
task.
Add: Click to register a macro, and a setup screen appears.
– ID: Assign a unique ID from 1 to 100 to the macro. When giving a 'macro ID' →
the network keyboard performs the actions registered on the macro.
– Name: Enter a macro name.
– No.: Displays the order of the macro. The network keyboard takes actions according to the order when
performing the macro.
– Button: Double click the field, and then click a button on the network keyboard image in the left to
assign the operation to perform.
– Dwell Time: Enter dwell time (sec.) for the action to last.
40
You can set up the macro function and function buttons.
ID: Displays the macro ID set up when adding the macro.
Name: Displays the macro name set up when adding
the macro.
Step Count: Displays the number of actions registered
on the macro.
Add: See below.
Edit: Select a macro in the list and click the button to
edit the setting.
Remove / Remove All: Select a macro in the list and
click the Remove button to delete it. Clicking the
Remove All button deletes all macros from the list.
command,
MACRO