Mounting Funkyswitch Tm And Button Boxes - FANATEC Clubsport User Manual

5.2 Mounting FunkySwitch and button boxes
TM
Open the case of the hub by loosing the four screws on the backside.
Use allen key 3mm
Mechanical:
The button boxes and FunkySwitch must be mounted between the main body
TM
front plate and the wheel rim.
In case you only install a single button box on one side you need to use washer
W1 (13.5 mm x 2.5 mm) between the wheel rim and the hub base in order to
avoid the rim being slanted.
Please notice that the FunkySwitch cable is
TM
bigger in diameter and there is only one of the
rubber cable protectors suitable for the Funky-
Switch cable. It is located on the right hand
TM
side as shown on the picture:
10