FANATEC Clubsport User Manual page 18

The large and small shifter paddles are both mounted onto the shifter paddle
boxes on the left and right side of the Universal Hub. Even these shifter pad-
dle boxes give the user the opportunity for adjustment: define the distance
between wheel rim and shifter paddles according to your individual fondness.
Therefore the Universal Hub has four screw holes on both
sides as shown in the picture:
If you use the two screw holes closer to the front side of
the Universal Hub the distance to the wheel rim is smaller
(depending on used wheel rim):
If you use the two screw holes closer to the back side of
the Universal Hub the distance to the wheel rim is bigger
(depending on used wheel rim):
The distance between front side holes and backside holes is 10 mm (center to
center). The holes have gears for M5 screws which are also contained in the
Universal Hub package.
18