Tuning Display - FANATEC Clubsport User Manual

5.6 Tuning display

The tuning display can show telemetry data or is used to change the behavior
settings of your ClubSport wheel (e.g. force feedback FF, spring SPR, damper
DPR) or for calibration of the H-pattern Fanatec shifters like CSS or CSS SQ.
ATTENTION: Take care for the pins and make sure they fit
properly into the sockets to avoid damage!
The tuning display can be used in horizontal or vertical position. To change po-
sition you must pull out the display from the Universal Hub and put it back in the
direction you want to use it. Note that it's not possible to turn the LED display
when it's inside the display slot of the Universal Hub.
For further information check the FAQ section on our website
www.fanatec.com/support
20