Wheel Rim - FANATEC Clubsport User Manual

5.3 Wheel rim

After you have installed all the button boxes and the FunkySwitch you can
TM
install the wheel rim. Make sure you use the washers W1 (13.5 mm x 2.5 mm;
included in Universal Hub box) if you are not installing button boxes on all four
sides equally.
You need to use M5 screws with a max. length of 16 mm in order to avoid a
collision with the PCBA inside the Universal Hub. For third party rim use the
screws S3 (M5 x 16 mm) which are included in the Universal Hub box.The
FANATEC wheel rims come with the correct screws.
®
In case your wheel rim does not have holes yet you can use the drilling tem-
plate on the next page to drill the correct hole pattern.
14