Electrical Operation; Hotkeys - FANATEC Clubsport User Manual

ELECTRICAL OPERATION

6

6.1 Hotkeys

Basically all hotkeys of the ClubSport Wheel Base can be used.
Center calibration: If a center calibra-
tion is needed when using the Univer-
sal Hub you need to enter the tuning
menu by using the small black button
on top of the Universal Hub as shown
on the picture:
When tuning menu is active then press the buttons at the same time
to calibrate the wheel center.
ATTENSION: When initialisation and auto calibration of the Club-
Sport Wheel Base is in progress never touch the Universal Hub or wheel
rim in order to avoid injuries or incorrect calibration!
PS3 Mode: Initially the ClubSport
Wheel Base is in PC mode. For use
on PlayStation 3 the ClubSport Wheel
Base must be switched to PS3 mode
by pressing the buttons at
the same time right after auto calibration of the ClubSport Wheel Base is com-
pleted. The tuning display of your Universal Hub shows a red dot when PS3
mode is active as shown on the picture on the right hand side.
21