FANATEC Clubsport User Manual page 12

After mechanical installation of the FunkySwitch you need
TM
to make sure that the arrow is located on the top side. If this is
not the case you can loosen the small worm screws and turn
the FunkySwitch .
TM
The button boxes can be mounted to short or long levers and on each of the
three sides of the button box.
Electrical
The FunkySwitch needs to be plugged in at long socket labeled (Funky-
TM
Switch _1). Connect the plug of the button box cable to any of the remaining
TM
5 plugs on the PCB labeled BUT_2 to BUT_6.
IMPORTANT: Please mind the correct direction of the plug and use no
force to connect the plugs!
12