Table of Contents
Advertisement
Transport WR Series Installation Guide
Preface
This guide describes the installation procedure for the Transport WR family of routers. It is
intended to provide sufficient information for you to be able to connect the unit to your
terminal equipment and power supply. A complete reference guide to the software
features that are available on the product is available separately in PDF format and can be
downloaded from the Digi International website (www.digi.com).
All models in the Transport WR and family feature:
1 x 10/100Base-T Ethernet port
1 x RS232 asynchronous serial port (RJ45 connector) 1 x USB 2.0 host port
2 x SIM sockets (GSM models)
1 x Wireless WAN interface (varies with model)
All models may also be purchased with one of a number of hardware options which are
listed in the section entitled "Optional Features" below.
Package Contents
When you receive the router carefully unpack it and check the contents. These should
include:
If any item is missing or damaged, please contact your supplier. You should also make a
record of any damage that may have occurred during shipping and report it to the carrier.
If you have ordered one of the available hardware options the package will also contain
additional cables/antennas as appropriate.
Item
System Unit
5V DC 3A power supply
Installation guide
CAT5 STP LAN cable
Antenna
for
Cellular
(may be sold separately)
4
Advertisement
Table of Contents
Need help?
Do you have a question about the Transport WR and is the answer not in the manual?
Questions and answers