App Control - Symbol P370 Keyless Reference Manual

P370/P470 Keyless RF Scanners Product Reference Guide
Option
Set RF Channel
Set Scanner ID
App. Control
App. Control allows you to control your application, specifically, load new applications on
your scanner, reset your default applications, etc.
2-4
Allows the user to set/change the RF channel used for
communication between the scanner and cradle.
The cordless Phaser scanner operates on a single,
programmable channel (frequency) between 2.402 GHz
(channel 02) and 2.483 GHz (channel 83).
A maximum of 81 channels are available. Not all channels are
available in all countries. If a channel is not legal to use in your
country, an error beep will be heard instead of a successful
warble. For a list of Channel Availability by Country, see
Appendix B, Radio Channels.
To enter a range, scan the bar code below followed by 2 digits
from the numeric bar code section (starting on page 4-98) to set
the desired channel. It is recommended that each scanner/cradle
pair be set to a different channel than neighboring scanner/cradle
pairs.
Scan the following barcode, followed by 3 digits from the numeric
barcode section (starting on page 4-98), to set the scanner ID.
The number of scanner ID's varies with the selected
communication protocol.
• RS-232/Synapse - range from 001 to 254
• MCL Link Lite (MCL Net) - range from 001 to 002
• MCL Link (MCL Net) - range from 001 to 254
Description
RF Channel
Scanner ID