Scanning - Symbol P370 Keyless Reference Manual

P370/P470 Keyless RF Scanners Product Reference Guide

Scanning

The scanner ships with the default application and default parameters and is ready-to-use
right out of the box. If this is not what you need for your application, refer to the MCL
Designer Manual for programming instructions and
scanning and communications parameters. If you need assistance, contact your local
supplier or Symbol Support Center.
1. Make sure the bar code is in the correct scanning range. Aim and press the trigger.
The scanner has read the symbol when:
• You hear a beep.
• The LED turns green.
• The red laser turns off.
2-14
Figure 2-1. Scanning a Bar Code
Chapter 4, Parameter Menus for