Chapter 2. Operation; Introduction; Default Application; Initial Powerup - Symbol P370 Keyless Reference Manual

Introduction

This chapter covers how to use the cordless Phaser scanner.

Default Application

The cordless scanner is shipped from the factory with a default scan and transmit
application.

Initial Powerup

After initialization, the scanner enters the Scan & Transmit application. The default
communication protocol is RS232/Synapse.
If a Synapse cable is attached, the scanner automatically overrides the default settings.

Scan and Transmit Application

The scan and transmit application allows you to transmit data to a host. Scanned bar codes
are automatically transmitted to the cradle and then the host in real time.
Chapter 2
Operation
2-1