programming bar codes. Scanner programming is saved in a setup file which can be
distributed electronically (Web site, floppy disk, E-mail, or fax).
A copy of 123Scan is on the CD included with your scanner. It is also available on the
Symbol Web site http://www.symbol.com. Use the web site's search tool to find
"123Scan" and select the P470/370 product line.
Note: Advanced data formatting rules created with 123Scan are for use
with the default application only and will not work with applications
created with MCL-Designer.
To download a 123Scan generated ADF rule, scan the bar code below, then initiate the
download on the PC utility.
Note: The scanner takes some time to initiate and will not be functional
during this time.
Note: If the Load 123Scan File barcode is scanned accidentally, cradle the
scanner and wait for a beep sequence. Remove the scanner and
allow it to reset (you will hear a Lo-Med-Hi beep). Once the scanner
resets, it will return to scan & transmit mode.
To remove previously programmed ADF rules from the scanner, scan the bar code below.
Load 123Scan File
Reset Default Application
(Clears previously programmed ADF rules)
Operation
2-9
Need help?
Do you have a question about the P370 Keyless and is the answer not in the manual?