System Setup
This section allows the user to set up the operation of the scanner
System Setup Options
System Setup allows you to configure the scanner's basic settings such as setting an RF
channel.
Option
Set Com Protocol
-RS232/Synapse
-MCL-NET
Sets the communication protocol used by the default application.
The options are MCL-Net or RS232/Synapse. If RS232/Synapse
is selected, the scanner automatically identifies whether an RS-
232 or Synapse interface is required.
To select RS232/Synapse, scan the barcode below:
To select MCL-NET, scan the barcode below:
Description
RS232/SYNAPSE
MCL-NET
Operation
2-3