Intercharacter Delay; Mcl-Net Parameters; Mcl-Net Baud Rate - Symbol P370 Keyless Reference Manual

P370/P470 Keyless RF Scanners Product Reference Guide

Intercharacter Delay

Select the intercharacter delay option matching host requirements. The intercharacter
delay gives the host system time to service its receiver and perform other tasks between
characters. The delay period can range from no delay to 99 ms in 1 ms increments (if you
are using a cradle and RTS/CTS handshaking, the delay period can range from 5 ms to 99
ms). After scanning the bar code below, scan two bar codes beginning on page 4-98 to set
the desired time-out. If you make an error, or wish to change your selection, scan
CANCEL on page 4-100.
INTERCHARACTER DELAY

MCL-Net Parameters

MCL-Net Baud Rate

Baud rate is the number of bits of data transmitted per second. Scan the appropriate bar
code below to set the MCL-Net baud rate. The default baud rate is 38400.
BAUD RATE 600
4-90