Symbol P370 Keyless Reference Manual page 36

P370/P470 Keyless RF Scanners Product Reference Guide
Option
System Code
Base Station Code
2-6
Updates the scanner operating system (Firmware).
To enter this mode from an application scan the bar code below.
Place the scanner in the cradle before initiating the download
from the PC Utility.
After the download is complete the application initiates.
Updates the cradle's operating system (Firmware).
To enter this mode from an application scan the bar code below.
To start the download to the cradle, press the start button on the
PC Utility.
Note: You will automatically return to the application after 15
seconds, even if the PC download is NOT initiated.
To exit this mode and prevent the download of new firmware or if
the PC download is not initiated, the power to the cradle must be
cycled (powered off then on) before it will communicate with the
scanner again. No action is required on the scanner side.
Description
System Code
Base Station Code