Intercharacter Delay - Symbol LS 6000 Series Product Reference Manual

LS 6000 Series Product Reference Guide

Intercharacter Delay

Select the intercharacter delay option matching host
requirements. The intercharacter delay gives the host system
time to service its receiver and perform other tasks between
characters. The delay period can range from no delay to 99 msec
in 1-msec increments. After scanning the bar code below, scan
two bar codes beginning on page 5-117 to set the desired time-
out. If you make an error or wish to change your selection,
scan CANCEL on page 5-122.
INTERCHARACTER DELAY
5-116