Table of Contents
Advertisement
Mercedes-Benz E-Class BR 211 / CLS BR 219
3
1
Loosen the bumper on the side facing the
1
wheel well:
Loosen the screws, move the clamping bar to
the front and remove it.
2
1 Clamping bar
2 Bolt
3 Coolant hose to the heater unit (will be
added Later, not yet present during
disassembly)
2
To route wiring harnesses and wires through
grommets, cable ducts or tight areas, we
recommend using the mecanyl fuel line. This,
for example, is pushed through a cable duct
until the desired point is reached, the wiring
harness is fastened with insulation tape and
pulled behind.
Preparing the wiring harness
2
Remove the wiring harness twine between
the connection of the fuel pump plug and the
unwrapped section.
1 Beginning of the wrapped section
2 Disconnecting the fuel pump connector
3 Fuel pump connector (blue)
3
3
Tips and
Tricks
Tips and
Tricks
Removing
the
wiring
harness
twine
6
Hide quick links:
Advertisement
Table of Contents
