Table of Contents
Advertisement
Mercedes-Benz E-Class BR 211 / CLS BR 219
2
1
1
2
3
Route the fuel line under the air intake
silencer to the wheel house cross member.
1
Fasten to cross member with it two fastening
clips and route to the wheel house.
1 Fastening clips [2x]
2 Fuel line
2
24
Water Connection
Disconnect both coolant hoses to the original
vehicle electric water pump with pliers and
remove.
Pull the plug off.
1 Water pump connector
2 Water pump
25
1
Turn the water pump in the bracket about
2
180°.
Check that the hose supports move easily to
the lines in the ABS unit.
Replace the connectors.
1 Hose supports
2 Water pump connector
26
Shorten the enclosed braided hose protection
4
by 380 mm.
From this 380 mm long piece, cut off
two 100 mm long pieces.
Place one 100 mm long piece on the hose
to the mechanical water pump.
Insert the coolant hose coupler and fasten
with a clamp.
1 Coolant hose coupler 18x18
2 Spring band clamp Ø25 mm
3 Braided hose protection 1=100 mm
4 Hose to the mechanical water pump
27
Fuel line
installation
Water
pump
preparat-
ion
Turning the
water
pump
Coolant
hose
preparat-
ion
13
Hide quick links:
Advertisement
Table of Contents
