Place Coolant Hose In Guide; Installing Coolant Hose - Webasto Mercedes-Benz E-Class BR 211 Installation Instructions Manual

Mercedes-Benz E-Class BR 211 / CLS BR 219
B
1
1 2
B
1
C
1
Place the moulded coolant hose in the gap
in the windshield fluid container and
then along the wiring harnesses under
the container shackle.
1 Windshield fluid container shackle
B Moulded coolant hose
36
Slide the long remnant of the braided hose
3 4
protection on hose C l=800 mm.
On one side, slide on the red rubber insulator.
On both sides, insert the coolant hose
couplers and fasten with clamps.
1 Spring band clamps Ø25 mm [2x]
2 Braided hose protection
3 Rubber insulator, red
4 Coolant hose coupler 15x18 [2x]
37
Connect the preassembled coolant hose to
the moulded hose and fasten with
clamp.
Remove the filling from the conduit.
2
Move the coolant hose to the front through
the guide.
Clip on the conduit cover.
1 Conduit cover
B Moulded hose
2 Spring band clamp Ø22 mm
C Coolant hose
38
Route coolant hose under the cross rail
according to Figure 39.
(Figure shows the CLS, always check
for access to the headlight!)
1 Coolant hose C
39
Routing
the coolant
hose
Coolant
hose
preassem-
bly
Place
coolant
hose in
guide
Installing
coolant
hose
16